A bit of re-jigging of the shed means I have been able to put all of the scenic boards for Brettell Road up together.  Its 5 months since the Cradley show – Time flies doesn’t it?

Theres a few things to fix after the show.  A couple of the points needed a check over as they weren’t totally reliable. I also found 2 dead sections that hadn’t shown up during the show so I fixed those too.  The lights on the upper floor of this building failed before the show but after the building had been planted onto the layout. It was too close to the show to fix it before so this is something to look at now I have time.  I also want to add a few yard lights and sort out the telegraph poles on the layout because as they stand now they don’t make a huge amount of sense.

The other thing to fix was the route setting on the main lines. Signalling purists are advised to look away now!  Before the track and signals were all operated separately via the throttles with only the yard set up as a route. (My Digitrax system allows me to program routes into it.) So thats been changed for operator convenience so that throwing a signal sets the route as well. I know the route should be set then the signal pulled rather than this way round. You can set the signals to danger on their own but in case you forget the routes will set all the other signals to danger for you anyway. I hoping this will be pretty simple to use.

Since the show I have a small stockpile of new rolling stock to be tested.  The rule is all stock must go everywhere without falling off, even though in this image only the middle road of wagons will go into the yard at shows.  Of this little lot only 4 wagons were rejected and returned to ‘works’ for some fettling. These 4 have now been passed too.

Below, just some more traditional layout style pictures.