In September I will be doing a demo at Scaleforum entitled getting the most from older models. Regular readers will know I have a bit of a thing for starting with old models that many will have long ago consigned to the bin. To this end I thought id look at a couple of old building kits too. Namely Airfix.

The Airfix Signal box is based on the one at Oakham which is a Midland Railway type 2a box from the early 1900’s I liked the look of the platform mounted version at Kings Heath (which is a type 3a) so set to work

The kit as supplied is too wide. I used some etched windows from Phoenix models and reduced the ends to fit. I binned the roof and knocked up a new end platform from microstrip. I wanted to use this model to try out a few new (to me) painting ideas.

First step was to paint it in an aged wood colour. The wood effect is pretty easy and quick if you work more like a painter and less like a modeller

I use these 4 Revell enamel colours as they are nice and matt. They are numbers 47 (mouse grey), 88 (ochre brown) , 84 (leather brown) and 9 (anthracite grey). The actual colours aren’t that critical. I use a dunk and dip technique and work on a base of Halfords grey primer. I dunk the brush into the mouse grey and ochre brown and lightly dip the tip into the leather and anthracite. All at the same time so that the brush is loaded with layers of colours. Then is just a simple case of drawing the brush across the model and letting the colours mix themselves. You don’t want them to mix too well so try and do one stroke per plank and work in the direction of the wood. The trick is to let the brush do the random work for you and not to fight it too much. My end result was a smidge dark so when dry, i drybrushed more mouse grey lightly over the model.

This is what ended up with. I then gave it a couple of coats of matt varnish.

This is the bit that’s new to me. Ranger distress paints. The large scale guys have been using these for a while with good results but the method for smaller scales seems a bit different. The pain is intended to be dabbed on quite think and left so that it starts to crackle and flake on it own. For our scale i found it better to brush it on on 2 coats. This doesn’t do any ‘magic though so the next stage is with a fine sanding stick to give it a little help. Again working in the direction of the wood.

Here’s the result. Distressed but not weathered. Another coat of Matt varnish and then back to enamels, used this time as a thin wash. I added an interior from Ratio and a signaller from Modelu. The finished result can be seen below